Most multi-light chandeliers line their shades up and hang them level. This Halden Smoked Glass Cluster Chandelier one deliberately doesn't. Eleven globes drop from a single brass-finish ring on black cords cut to different lengths, so the cluster fills space in three dimensions instead of drawing one flat line across the ceiling.
That matters more than it sounds. A level row reads the same from every seat at the table. A staggered cluster changes as you move around it — globes overlap, separate, and re-form depending on where you stand. It is the difference between a light fitting and something people look at. The effect is a room that feels lit by candlelight but is genuinely bright enough to eat and read under — the two things a dining room chandelier usually has to choose between.
Specifications
The Details
MaterialMetal Frame · Glass Shades
FinishGold · Black · Nickel
GlassClear smoked tea-Brown · TransparentTransparent, so the filament shows through — reads amber once lit.
Bulb baseE12 or E14 (bulbs not included) The small candelabra screw base. Use clear filament bulbs — see below.
PowerMax 40WMultiply by the number of shades and check the total against your dimmer before wiring.
VoltageAC 110–240V
ControlWall switch Dimmable with dimmable bulbs on a compatible dimmer.
MountingCeiling — hardwired Professional installation recommended.
EnvironmentIndoor only · IP20
Preparation time5–10 days Made to order and inspected before dispatch.
Good to Know
About dimming
It depends entirely on the bulbs. To dim it, fit dimmable E12 bulbs in every socket — not just some, as mixing types causes flicker — and pair them with a compatible dimmer switch.
Size Guide
Which Size for Your Room
Four sizes, from three feet across to six. These are large fixtures — measure the room before you choose, not the photograph.
Small
∅ 35.9″ × H 22.6″91 × 57 cm
Best forRound dining table 48–60″ · standard dining room · breakfast area
Ceiling9 ft +
The one that fits a normal dining room.
Medium
∅ 48″122 cm
Best forRound table 60–72″ · open-plan living · entry with height
Ceiling10–12 ft
Four feet across — it becomes the room's centre.
Large
∅ 59.8″152 cm
Best forDouble-height entry · stairwell seen from two floors · large open plan
Ceiling12–16 ft
Five feet across. Needs a void, not a room.
Grand
∅ 72″ × H 59.1″183 × 150 cm
Best forAtrium · three-storey entry · hotel or restaurant · cathedral ceiling
Ceiling16 ft +
Six feet across and five deep. Plan access for installation.
The design
A Cluster, Not a Row
Hung at different heights, on purpose.
Almost every multi-light chandelier lines its shades up and hangs them level. The result is a flat plane of light that presents exactly the same face from every chair at the table. This one is built the other way: each shade drops on its own cord, cut to its own length, so the group occupies three dimensions instead of one.
That single decision changes how the fixture behaves. Shades overlap, separate and re-form as you move around it — it is not the same object from the doorway as it is from your seat. And because the cords are cut during installation rather than fixed at our factory, how deep the cluster falls and how far it staggers is decided in your room, by you.
The glass does the other half of the work. It is tinted and transparent, not frosted, so a clear filament sits visible inside each shade and the tint takes the hard edge off it. What reaches the table is warm and even — enough light to eat and read by, with nothing anywhere to squint at. That balance is the thing a dining room fixture usually has to choose between.
— Eleven small lights, arranged in the air. —
The Shape
Why a Staggered Cluster
What this does that a level multi-light chandelier can't.
Staggered ClusterLevel Multi-Light
The shapeFills space in three dimensionsOne flat plane across the ceiling
From your seatDifferent from every chair — shades overlap and separate as you moveThe same face from everywhere in the room
Who sets itCords cut at installation — you decide the depthFixed at the factory, arrives as it arrives
The lightTinted glass softens each filament — bright, no hotspotClear glass leaves every bulb visible and sharp
If damagedOne shade swaps on its own cordOften a moulded assembly — the whole fixture goes back
Questions, Answered
Common Questions
What bulbs should I use?
Clear filament bulbs, 2700K warm white — E12, not included. The glass is tinted and transparent, so the filament is meant to show. A frosted bulb behind it goes flat and muddy. Use the same bulb in every socket; one odd one shows straight away.
Can I choose the heights?
Yes. Every cord is cut to length during installation, so how deep the cluster falls and how far the shades stagger is set in your room. Tall entry or stairwell? Tell us the height when you order and we'll send extra cord.
What is the metal?
A metal frame, available in gold, black or nickel. Gold warms the amber glass; black holds it as a defined shape; nickel keeps it cooler. Same size, same price.
Will it be too bright?
No. The tinted glass takes the hard edge off each bulb, so it's bright without a hotspot. Put it on a dimmer and it covers dinner and everything after.
How high do I hang it?
30–36″ from the tabletop to the lowest shade. Anywhere people walk beneath it, keep 7 ft of clearance from the floor.
Will my ceiling take the weight?
Check before ordering. Every shade hangs from one ceiling point, and a standard junction box carries less than most people assume — a brace may be needed. Ask us for the weight and give it to your electrician.
Where can't it go?
IP20 — no water protection. Not in a bathroom, above a bath, or outdoors. Indoor, dry locations only.
How do I clean it? What if one breaks?
Clean: power off, let the bulbs cool, then a soft dry cloth on each shade. No ammonia sprays. If one breaks: it's replaced on its own cord — never the whole fixture. Photos within 24 hours if damaged in transit; we hold spares after that.
Installation
The Complete Installation Guide
Not sure how to wire it, how high to hang it, or whether you need an electrician? Our full guide walks through every step for US homes.
01
Power Off First
Switch off at the breaker and confirm before you touch any wiring.
02
Check the Box
Make sure your junction box is standard, secure, and rated for the weight.
03
Match the Wires
Black to black, white to white, ground to ground — the US standard explained.
04
Set the Height
Mounting heights and clearances for sconces, pendants, and chandeliers.
The linear answer. Glass orbs threaded onto a matte black bar rather than hung beneath it, alternating above and below the line. 70.9″ long — built for an 8–9 ft table or island, where a cluster would leave the ends dark. Clear glass, or a mixed row of red, amber and opal.
The wall layer. A tall column of ribbed glass rods that splits one lamp into dozens of fine vertical lines, with the bulb hidden behind them. Gold, black or nickel — and it goes where there is no ceiling box to hang from: a hallway, a landing, either side of a mirror.
Most multi-light chandeliers line their shades up and hang them level. This Halden Smoked Glass Cluster Chandelier one deliberately doesn't. Eleven globes drop from a single brass-finish ring on black cords cut to different lengths, so the cluster fills space in three dimensions instead of drawing one flat line across the ceiling.
That matters more than it sounds. A level row reads the same from every seat at the table. A staggered cluster changes as you move around it — globes overlap, separate, and re-form depending on where you stand. It is the difference between a light fitting and something people look at. The effect is a room that feels lit by candlelight but is genuinely bright enough to eat and read under — the two things a dining room chandelier usually has to choose between.
Specifications
The Details
MaterialMetal Frame · Glass Shades
FinishGold · Black · Nickel
GlassClear smoked tea-Brown · TransparentTransparent, so the filament shows through — reads amber once lit.
Bulb baseE12 or E14 (bulbs not included) The small candelabra screw base. Use clear filament bulbs — see below.
PowerMax 40WMultiply by the number of shades and check the total against your dimmer before wiring.
VoltageAC 110–240V
ControlWall switch Dimmable with dimmable bulbs on a compatible dimmer.
MountingCeiling — hardwired Professional installation recommended.
EnvironmentIndoor only · IP20
Preparation time5–10 days Made to order and inspected before dispatch.
Good to Know
About dimming
It depends entirely on the bulbs. To dim it, fit dimmable E12 bulbs in every socket — not just some, as mixing types causes flicker — and pair them with a compatible dimmer switch.
Size Guide
Which Size for Your Room
Four sizes, from three feet across to six. These are large fixtures — measure the room before you choose, not the photograph.
Small
∅ 35.9″ × H 22.6″91 × 57 cm
Best forRound dining table 48–60″ · standard dining room · breakfast area
Ceiling9 ft +
The one that fits a normal dining room.
Medium
∅ 48″122 cm
Best forRound table 60–72″ · open-plan living · entry with height
Ceiling10–12 ft
Four feet across — it becomes the room's centre.
Large
∅ 59.8″152 cm
Best forDouble-height entry · stairwell seen from two floors · large open plan
Ceiling12–16 ft
Five feet across. Needs a void, not a room.
Grand
∅ 72″ × H 59.1″183 × 150 cm
Best forAtrium · three-storey entry · hotel or restaurant · cathedral ceiling
Ceiling16 ft +
Six feet across and five deep. Plan access for installation.
The design
A Cluster, Not a Row
Hung at different heights, on purpose.
Almost every multi-light chandelier lines its shades up and hangs them level. The result is a flat plane of light that presents exactly the same face from every chair at the table. This one is built the other way: each shade drops on its own cord, cut to its own length, so the group occupies three dimensions instead of one.
That single decision changes how the fixture behaves. Shades overlap, separate and re-form as you move around it — it is not the same object from the doorway as it is from your seat. And because the cords are cut during installation rather than fixed at our factory, how deep the cluster falls and how far it staggers is decided in your room, by you.
The glass does the other half of the work. It is tinted and transparent, not frosted, so a clear filament sits visible inside each shade and the tint takes the hard edge off it. What reaches the table is warm and even — enough light to eat and read by, with nothing anywhere to squint at. That balance is the thing a dining room fixture usually has to choose between.
— Eleven small lights, arranged in the air. —
The Shape
Why a Staggered Cluster
What this does that a level multi-light chandelier can't.
Staggered ClusterLevel Multi-Light
The shapeFills space in three dimensionsOne flat plane across the ceiling
From your seatDifferent from every chair — shades overlap and separate as you moveThe same face from everywhere in the room
Who sets itCords cut at installation — you decide the depthFixed at the factory, arrives as it arrives
The lightTinted glass softens each filament — bright, no hotspotClear glass leaves every bulb visible and sharp
If damagedOne shade swaps on its own cordOften a moulded assembly — the whole fixture goes back
Questions, Answered
Common Questions
What bulbs should I use?
Clear filament bulbs, 2700K warm white — E12, not included. The glass is tinted and transparent, so the filament is meant to show. A frosted bulb behind it goes flat and muddy. Use the same bulb in every socket; one odd one shows straight away.
Can I choose the heights?
Yes. Every cord is cut to length during installation, so how deep the cluster falls and how far the shades stagger is set in your room. Tall entry or stairwell? Tell us the height when you order and we'll send extra cord.
What is the metal?
A metal frame, available in gold, black or nickel. Gold warms the amber glass; black holds it as a defined shape; nickel keeps it cooler. Same size, same price.
Will it be too bright?
No. The tinted glass takes the hard edge off each bulb, so it's bright without a hotspot. Put it on a dimmer and it covers dinner and everything after.
How high do I hang it?
30–36″ from the tabletop to the lowest shade. Anywhere people walk beneath it, keep 7 ft of clearance from the floor.
Will my ceiling take the weight?
Check before ordering. Every shade hangs from one ceiling point, and a standard junction box carries less than most people assume — a brace may be needed. Ask us for the weight and give it to your electrician.
Where can't it go?
IP20 — no water protection. Not in a bathroom, above a bath, or outdoors. Indoor, dry locations only.
How do I clean it? What if one breaks?
Clean: power off, let the bulbs cool, then a soft dry cloth on each shade. No ammonia sprays. If one breaks: it's replaced on its own cord — never the whole fixture. Photos within 24 hours if damaged in transit; we hold spares after that.
Installation
The Complete Installation Guide
Not sure how to wire it, how high to hang it, or whether you need an electrician? Our full guide walks through every step for US homes.
01
Power Off First
Switch off at the breaker and confirm before you touch any wiring.
02
Check the Box
Make sure your junction box is standard, secure, and rated for the weight.
03
Match the Wires
Black to black, white to white, ground to ground — the US standard explained.
04
Set the Height
Mounting heights and clearances for sconces, pendants, and chandeliers.
The linear answer. Glass orbs threaded onto a matte black bar rather than hung beneath it, alternating above and below the line. 70.9″ long — built for an 8–9 ft table or island, where a cluster would leave the ends dark. Clear glass, or a mixed row of red, amber and opal.
The wall layer. A tall column of ribbed glass rods that splits one lamp into dozens of fine vertical lines, with the bulb hidden behind them. Gold, black or nickel — and it goes where there is no ceiling box to hang from: a hallway, a landing, either side of a mirror.
Unboxing it felt like opening a luxury item. It came with all the necessary installation hardware and clear instructions. The construction is solid, the alabaster veining is naturally beautiful, and it’s definitely one of my favorite purchases for the house!
The two lamps I received have very natural textures, and although there are some slight differences, they make them unique. The warm light diffusing through the alabaster creates a very cozy ambiance.
I installed it next to the mirror in the downstairs guest bathroom. The stone diffuses light evenly, creating a fantastic atmosphere when it’s the only light on at night.
