Unlock Savings: Get 10% Off Automatically on Orders Over $100!

Free standard shipping, all orders support 30-day returns

Your cart

Your cart is empty

Alabaster Collection · Swag Chandelier

Liora Beaded Alabaster Swag ChandelierA line of glowing stone, drawn by gravity

The Liora Beaded Alabaster Swag Chandelier is a continuous strand of natural alabaster beads, hung between small ceiling anchors so that each length falls into a soft curve of its own. One strand, several strands crossing, or a whole ceiling drawn on: the arrangement is decided by where the anchors go, not by us.

StairwellDouble-Height EntryDining TableOpen-Plan CeilingOrganic Modern

What makes it unlike anything else in the range: every single bead is lit. This is not a strand of decoration with a bulb somewhere behind it. Light runs the whole length, so each stone glows from within and the veining inside each bead shows individually.

The curve is not designed either. Hang anything flexible between two fixed points and gravity draws the same line, the one a necklace makes. Move the anchors closer and the strand falls deep and narrow; spread them wide and it stretches into a long shallow sweep.

Suited to a stairwell, a double-height entry, above a long dining table, or drawn across an open-plan ceiling.

Natural alabaster pieces in our workshop, each with its own veining

Natural Alabaster

Naturally unique veining

Alabaster is a natural stone, so every bead carries its own veining and subtle variation in color. One is pale and cloudy, the next carries a strong amber grain, the one after is almost clear. The strand you receive may therefore differ slightly from the images shown.

An inherent characteristic of real stone, not a quality defect.

Layout & Installation

You don’t hang it. You draw with it.

There is no frame and no canopy plate, just a strand and a set of small anchors. Where you put the anchors is the whole design, so the same product makes a different fixture in every room.

One rule decides every curve

Hang anything flexible between two fixed points and gravity draws the line a necklace makes. Anchors close together give a deep, narrow fall; anchors far apart give a long shallow sweep. You choose two points, and the curve follows.

2 anchors · 1 strand
Simplest

A Single Swag

Two anchors, one curve. The quietest version: a single line drawn across a ceiling.

Best over a dining table or a long console
4 anchors · 3 strands, stepped
Most chosen

Layered Swags

Several strands sharing anchors, each hung deeper than the one above, so the piece gains real volume.

Best in a stairwell or a double-height entry
4 anchors · strands overlapping
Sculptural

Crossing Strands

Two swags that overlap in the middle. Where they cross, the beads double up into a bright knot of light.

Best where the ceiling is seen from a landing
5+ anchors · one continuous run
Widest reach

A Running Line

One strand carried across several anchors in a row, dipping between each, like a line drawn on the ceiling.

Best across an open-plan ceiling or a long hallway

Going Further

Order several and layer them into one piece

Each chandelier is an independent strand with its own anchors, so two or three can share a ceiling and read as a single fixture. Nothing is joined and nothing is modified.

piece 1piece 2piece 3

Three separate chandeliers, three sets of anchors, one arrangement.

1

Stagger the depths. Hang each piece noticeably deeper than the last, so the layers stay separate from every angle.

2

Offset the anchors. Shift each set sideways so the curves cross rather than stack behind each other.

3

Three is usually the limit. Beyond that a ceiling starts to read as busy rather than layered.

4

One switch or several. On one switch it reads as a single piece; on separate switches you can light one strand for an evening and all three for guests.

Size & Strand Length

Five lengths, one 6 cm bead

Every strand is built from the same 6 cm (2.4″) alabaster beads. Tap a length to see it drawn to scale, with the exact number of beads.

The extra length is the drop

A strand is always longer than the gap it spans, and that surplus is what falls into the curve. Fix a 300 cm strand across a narrow span for a deep, dramatic sweep, or across a wide span for a long shallow arc.

narrow span → deep curvewide span → shallow sweep
Line Drawing · To Scale100 cm strand
100 cm / 39.4″ strand · 13 beads100 cm scaleØ 6 cm bead
Compact

100 cm Strand

Total length 100 cm / 39.4″

13Alabaster beads
6 cmBead Ø / 2.4″

A single contained curve over a round dining table, a breakfast nook or an entry.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale200 cm strand
200 cm / 78.7″ strand · 27 beads100 cm scaleØ 6 cm bead
Dining & Island

200 cm Strand

Total length 200 cm / 78.7″

27Alabaster beads
6 cmBead Ø / 2.4″

Right for a rectangular dining table, a kitchen island, or a stairwell seen from one landing.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale300 cm strand
300 cm / 118.1″ strand · 42 beads100 cm scaleØ 6 cm bead
Architectural

300 cm Strand

Total length 300 cm / 118.1″

42Alabaster beads
6 cmBead Ø / 2.4″

A double-height entry, a long hallway, or a stairwell viewed from several floors.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale400 cm strand
400 cm / 157.5″ strand · 57 beads100 cm scaleØ 6 cm bead
Open-Plan

400 cm Strand

Total length 400 cm / 157.5″

57Alabaster beads
6 cmBead Ø / 2.4″

For open-plan ceilings and atriums, drawing a line right through the space.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale500 cm strand
500 cm / 196.9″ strand · 70 beads100 cm scaleØ 6 cm bead
Grand

500 cm Strand

Total length 500 cm / 196.9″

70Alabaster beads
6 cmBead Ø / 2.4″

The longest strand, for a running line across a large room or deep layers in a tall stairwell.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Liora Beaded Alabaster Swag Chandelier technical dimension drawing, 200 cm strand with 6 cm beads

Technical Drawing

200 cm strand shown

Total length
200 cm / 78.7″
Beads
27 natural alabaster
Bead size
Ø 6 cm / 2.4″
Light
Every bead lit, 3000K

Every length uses the same bead, so a longer strand simply adds more glowing stones along the curve.

Specifications

The details

Want it dimmable? The LED is built into the strand, so ask for the dimmable version when you order.

Product Name Liora Beaded Alabaster Swag Chandelier
Material Genuine natural alabaster beads · metal anchorsStone cut and polished; metal electroplated and finished.
Finish White · GoldAlabaster is natural white in both.
Bead Size Ø 6 cm / 2.4″
Strand Length 100 cm / 39.4″ (13 beads)
200 cm / 78.7″ (27 beads)
300 cm / 118.1″ (42 beads)
400 cm / 157.5″ (57 beads)
500 cm / 196.9″ (70 beads)
Light Source Integrated LED, warm white 3000KBuilt into the strand. No bulb to buy, fit or replace.
Max Wattage 40W
Voltage AC 110–240V
Control Standard wall switchDimmable version available, ask before ordering.
Mounting Ceiling, hardwired, multiple anchor points
Environment Indoor, dry locations only
Preparation Time 5–10 daysMade and inspected at our own workshop before dispatch.

The Design

We took the fixture away and kept only the light

No frame. No canopy. No body. Just a line.

Take almost any chandelier apart and most of what you are holding is not light. It is structure: a frame to give it shape, arms to hold the shades out, a canopy plate to hide the wiring. All of it hangs there in daylight doing nothing.

Liora began by asking whether any of that was required. A strand of beads needs no frame, because the ceiling itself provides the structure: two small anchors and gravity between them. What is left is a line of glowing stone and a ceiling behind it.

Every bead in that line is lit, so the veining inside every stone shows individually: one pale and cloudy, the next with a strong amber grain. Strung together they read as a line of separate small warmths, the difference between quarried stone and moulded resin.

The curve is not ours either. We send you a length, and your ceiling decides the rest. That is why no two installations are the same: the fixture is finished in your room rather than in our workshop.

A length of stone. Two points. Gravity does the drawing.

Questions, Answered

Common questions

How it fixes to your ceiling, what we need from you, and what arrives in the box.

Can I hang this where my current light is?

No. Each strand runs between two or more ceiling anchors, so you need several fixing points with wiring; send us a photo and we will mark where every anchor goes.

What do you need from me before I order?

Your ceiling height, the span you want to cover, and what sits underneath. We then confirm the length and cut the strand before it ships.

How deep will the curve hang?

It depends on the gap between the anchors: close anchors give a deep drop, wide anchors a shallow sweep. Tell us the depth you want and we will work out the spacing.

Does every bead really light up?

Yes. Light runs the full length of the strand, so each stone glows from within and shows its own veining.

Is there a bulb to replace?

No. The warm white 3000K LED is built into the strand, so there is nothing to buy or replace.

Can I dim it?

Yes, if you ask when you order. Tell us which dimmer switch you plan to use so we can confirm it works.

Can I install more than one in a room?

Yes. Hang each strand noticeably deeper than the last and offset the anchors sideways; three is usually the limit in one space.

Will my ceiling hold it?

The weight is spread across several anchors, but each must be fixed into the structure above, not plasterboard alone. Ask us for the weight of your length.

How high should it hang?

Keep the lowest bead 30–36″ above a dining table and 7 ft above any walkway. In a stairwell, check every landing it passes.

Why don’t the beads match?

They are cut from natural stone, so every bead carries its own veining. A strand where every bead matched would have to be resin.

What if a bead arrives damaged?

Send us photos within 24 hours of delivery and we will arrange a replacement. Please do not open or re-string it yourself.

How do I clean it, and can it go in a bathroom?

Wipe the beads with a soft dry cloth and keep water off the porous stone. It is for indoor dry rooms only, so not bathrooms.

Installation

The complete installation guide

Not sure how to wire it, how high to hang it, or whether you need an electrician? Our full guide walks through every step for US homes.

Read the full guide →
01

Power off first

Switch off at the breaker and confirm before touching any wiring.

02

Check the fixings

Every anchor must be secure and fixed into the structure above.

03

Match the wires

Black to black, white to white, ground to ground.

04

Set the height

Check clearances over tables, walkways and stair landings.

Liora Beaded Alabaster Swag Chandelier

SKU: V202503241-1
Regular price $995.00
Unit price
per 

The price includes tax, and free standard shipping within the U.S. is provided.

Availability
 
Tax & Shipping calculated at checkout.
✦ With a brand-new lighting ambiance, let's usher in a hopeful 2026 10% Off All Lighting ✦
Built Right, Inside and Out

The beauty of a fixture is easy to photograph. What matters just as much is what sits inside the canopy—the driver, the bracket, the wiring, the hardware in the box. Here is how we build for safety and longevity, so the fixture you order arrives ready to install and made to last.

Install the driver, bracket and other components - Vidirlighting
01 · The Driver

An LED Driver Built to Last

We offer integrated LED drivers in a range of styles—dimmable, constant-current, and color-temperature-adjustable—so the fixture can be matched to how you actually light the room. It runs on 110–240V, works straight out of the box on standard US household power, and is rated for both dry and damp locations, so it fits wherever you'd like to install it.

02 · The Bracket

A Solid Mounting Bracket

Every fixture ships with a sturdy mounting bracket sized to a standard US junction box—so it hangs true and stays secure, year after year. No improvising, no trips to the hardware store.

03 · The Box

Everything You Need, in One Box

Open the carton and it's all there—canopy, mounting plate and bracket, screws and wall anchors, the driver, and a pair of clean cotton gloves for handling the glass. Nothing missing, nothing to source separately. It's the small stuff, packed with care, that makes installation day feel easy.

04 · The Wiring

Clean, Color-Coded Wiring

Clearly labeled leads and a tidy factory harness make professional installation quick and unambiguous. Hand it to your electrician and they'll have it up in minutes—standard L / N / E hardwiring, the way a considered fixture should be.

Order with confidence: what arrives at your door is a fixture built to be lived with—considered on the inside, finished on the outside. Wiring should be carried out by a qualified electrician in line with local code.

Free Shipping on all orders

Hassle-free return within 30 days

Payment Security

✦ Complete the Look

Pairs Well With

Alabaster Collection · Swag Chandelier

Liora Beaded Alabaster Swag ChandelierA line of glowing stone, drawn by gravity

The Liora Beaded Alabaster Swag Chandelier is a continuous strand of natural alabaster beads, hung between small ceiling anchors so that each length falls into a soft curve of its own. One strand, several strands crossing, or a whole ceiling drawn on: the arrangement is decided by where the anchors go, not by us.

StairwellDouble-Height EntryDining TableOpen-Plan CeilingOrganic Modern

What makes it unlike anything else in the range: every single bead is lit. This is not a strand of decoration with a bulb somewhere behind it. Light runs the whole length, so each stone glows from within and the veining inside each bead shows individually.

The curve is not designed either. Hang anything flexible between two fixed points and gravity draws the same line, the one a necklace makes. Move the anchors closer and the strand falls deep and narrow; spread them wide and it stretches into a long shallow sweep.

Suited to a stairwell, a double-height entry, above a long dining table, or drawn across an open-plan ceiling.

Natural alabaster pieces in our workshop, each with its own veining

Natural Alabaster

Naturally unique veining

Alabaster is a natural stone, so every bead carries its own veining and subtle variation in color. One is pale and cloudy, the next carries a strong amber grain, the one after is almost clear. The strand you receive may therefore differ slightly from the images shown.

An inherent characteristic of real stone, not a quality defect.

Layout & Installation

You don’t hang it. You draw with it.

There is no frame and no canopy plate, just a strand and a set of small anchors. Where you put the anchors is the whole design, so the same product makes a different fixture in every room.

One rule decides every curve

Hang anything flexible between two fixed points and gravity draws the line a necklace makes. Anchors close together give a deep, narrow fall; anchors far apart give a long shallow sweep. You choose two points, and the curve follows.

2 anchors · 1 strand
Simplest

A Single Swag

Two anchors, one curve. The quietest version: a single line drawn across a ceiling.

Best over a dining table or a long console
4 anchors · 3 strands, stepped
Most chosen

Layered Swags

Several strands sharing anchors, each hung deeper than the one above, so the piece gains real volume.

Best in a stairwell or a double-height entry
4 anchors · strands overlapping
Sculptural

Crossing Strands

Two swags that overlap in the middle. Where they cross, the beads double up into a bright knot of light.

Best where the ceiling is seen from a landing
5+ anchors · one continuous run
Widest reach

A Running Line

One strand carried across several anchors in a row, dipping between each, like a line drawn on the ceiling.

Best across an open-plan ceiling or a long hallway

Going Further

Order several and layer them into one piece

Each chandelier is an independent strand with its own anchors, so two or three can share a ceiling and read as a single fixture. Nothing is joined and nothing is modified.

piece 1piece 2piece 3

Three separate chandeliers, three sets of anchors, one arrangement.

1

Stagger the depths. Hang each piece noticeably deeper than the last, so the layers stay separate from every angle.

2

Offset the anchors. Shift each set sideways so the curves cross rather than stack behind each other.

3

Three is usually the limit. Beyond that a ceiling starts to read as busy rather than layered.

4

One switch or several. On one switch it reads as a single piece; on separate switches you can light one strand for an evening and all three for guests.

Size & Strand Length

Five lengths, one 6 cm bead

Every strand is built from the same 6 cm (2.4″) alabaster beads. Tap a length to see it drawn to scale, with the exact number of beads.

The extra length is the drop

A strand is always longer than the gap it spans, and that surplus is what falls into the curve. Fix a 300 cm strand across a narrow span for a deep, dramatic sweep, or across a wide span for a long shallow arc.

narrow span → deep curvewide span → shallow sweep
Line Drawing · To Scale100 cm strand
100 cm / 39.4″ strand · 13 beads100 cm scaleØ 6 cm bead
Compact

100 cm Strand

Total length 100 cm / 39.4″

13Alabaster beads
6 cmBead Ø / 2.4″

A single contained curve over a round dining table, a breakfast nook or an entry.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale200 cm strand
200 cm / 78.7″ strand · 27 beads100 cm scaleØ 6 cm bead
Dining & Island

200 cm Strand

Total length 200 cm / 78.7″

27Alabaster beads
6 cmBead Ø / 2.4″

Right for a rectangular dining table, a kitchen island, or a stairwell seen from one landing.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale300 cm strand
300 cm / 118.1″ strand · 42 beads100 cm scaleØ 6 cm bead
Architectural

300 cm Strand

Total length 300 cm / 118.1″

42Alabaster beads
6 cmBead Ø / 2.4″

A double-height entry, a long hallway, or a stairwell viewed from several floors.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale400 cm strand
400 cm / 157.5″ strand · 57 beads100 cm scaleØ 6 cm bead
Open-Plan

400 cm Strand

Total length 400 cm / 157.5″

57Alabaster beads
6 cmBead Ø / 2.4″

For open-plan ceilings and atriums, drawing a line right through the space.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Line Drawing · To Scale500 cm strand
500 cm / 196.9″ strand · 70 beads100 cm scaleØ 6 cm bead
Grand

500 cm Strand

Total length 500 cm / 196.9″

70Alabaster beads
6 cmBead Ø / 2.4″

The longest strand, for a running line across a large room or deep layers in a tall stairwell.

The span between anchors is always shorter than the strand; the extra length forms the curve.

Liora Beaded Alabaster Swag Chandelier technical dimension drawing, 200 cm strand with 6 cm beads

Technical Drawing

200 cm strand shown

Total length
200 cm / 78.7″
Beads
27 natural alabaster
Bead size
Ø 6 cm / 2.4″
Light
Every bead lit, 3000K

Every length uses the same bead, so a longer strand simply adds more glowing stones along the curve.

Specifications

The details

Want it dimmable? The LED is built into the strand, so ask for the dimmable version when you order.

Product Name Liora Beaded Alabaster Swag Chandelier
Material Genuine natural alabaster beads · metal anchorsStone cut and polished; metal electroplated and finished.
Finish White · GoldAlabaster is natural white in both.
Bead Size Ø 6 cm / 2.4″
Strand Length 100 cm / 39.4″ (13 beads)
200 cm / 78.7″ (27 beads)
300 cm / 118.1″ (42 beads)
400 cm / 157.5″ (57 beads)
500 cm / 196.9″ (70 beads)
Light Source Integrated LED, warm white 3000KBuilt into the strand. No bulb to buy, fit or replace.
Max Wattage 40W
Voltage AC 110–240V
Control Standard wall switchDimmable version available, ask before ordering.
Mounting Ceiling, hardwired, multiple anchor points
Environment Indoor, dry locations only
Preparation Time 5–10 daysMade and inspected at our own workshop before dispatch.

The Design

We took the fixture away and kept only the light

No frame. No canopy. No body. Just a line.

Take almost any chandelier apart and most of what you are holding is not light. It is structure: a frame to give it shape, arms to hold the shades out, a canopy plate to hide the wiring. All of it hangs there in daylight doing nothing.

Liora began by asking whether any of that was required. A strand of beads needs no frame, because the ceiling itself provides the structure: two small anchors and gravity between them. What is left is a line of glowing stone and a ceiling behind it.

Every bead in that line is lit, so the veining inside every stone shows individually: one pale and cloudy, the next with a strong amber grain. Strung together they read as a line of separate small warmths, the difference between quarried stone and moulded resin.

The curve is not ours either. We send you a length, and your ceiling decides the rest. That is why no two installations are the same: the fixture is finished in your room rather than in our workshop.

A length of stone. Two points. Gravity does the drawing.

Questions, Answered

Common questions

How it fixes to your ceiling, what we need from you, and what arrives in the box.

Can I hang this where my current light is?

No. Each strand runs between two or more ceiling anchors, so you need several fixing points with wiring; send us a photo and we will mark where every anchor goes.

What do you need from me before I order?

Your ceiling height, the span you want to cover, and what sits underneath. We then confirm the length and cut the strand before it ships.

How deep will the curve hang?

It depends on the gap between the anchors: close anchors give a deep drop, wide anchors a shallow sweep. Tell us the depth you want and we will work out the spacing.

Does every bead really light up?

Yes. Light runs the full length of the strand, so each stone glows from within and shows its own veining.

Is there a bulb to replace?

No. The warm white 3000K LED is built into the strand, so there is nothing to buy or replace.

Can I dim it?

Yes, if you ask when you order. Tell us which dimmer switch you plan to use so we can confirm it works.

Can I install more than one in a room?

Yes. Hang each strand noticeably deeper than the last and offset the anchors sideways; three is usually the limit in one space.

Will my ceiling hold it?

The weight is spread across several anchors, but each must be fixed into the structure above, not plasterboard alone. Ask us for the weight of your length.

How high should it hang?

Keep the lowest bead 30–36″ above a dining table and 7 ft above any walkway. In a stairwell, check every landing it passes.

Why don’t the beads match?

They are cut from natural stone, so every bead carries its own veining. A strand where every bead matched would have to be resin.

What if a bead arrives damaged?

Send us photos within 24 hours of delivery and we will arrange a replacement. Please do not open or re-string it yourself.

How do I clean it, and can it go in a bathroom?

Wipe the beads with a soft dry cloth and keep water off the porous stone. It is for indoor dry rooms only, so not bathrooms.

Installation

The complete installation guide

Not sure how to wire it, how high to hang it, or whether you need an electrician? Our full guide walks through every step for US homes.

Read the full guide →
01

Power off first

Switch off at the breaker and confirm before touching any wiring.

02

Check the fixings

Every anchor must be secure and fixed into the structure above.

03

Match the wires

Black to black, white to white, ground to ground.

04

Set the height

Check clearances over tables, walkways and stair landings.

Customer Reviews

The quiet glow of alabaster
Vidir lighting / 01

Natural stone lighting

The quiet glow of alabaster

Sculpted by nature, refined for modern spaces. Discover light with a softer point of view.
Hand-finished in stone
The alabaster edit

The Vidir lighting edit

The only shade that glows from inside.

Most shades block light and let it out at the edges. Yet, this stone-textured lampshade manages to achieve exactly that.

01

Translucent properties

Alabaster is translucent. Switch it on and the whole shade lights up from within, veining and all, instead of glowing only where the bulb sits. There is no bright spot to look at, because the light source is the entire surface.

02

Naturally formed

The veining was decided underground, long before anyone cut it. Every shade carries its own pattern and its own faint colour shift — so the piece that arrives is not the piece in the photograph, and that is the point.

03

Durable and long-lasting

Resin and acrylic imitations go amber and brittle within a few years of sitting next to a warm bulb. Stone does not age that way. The shade you unpack is the shade you will have in twenty years.

Designed for better living

Stone Light Fixtures

Natural stone is different from metal or glass. Understanding these points before you buy ensures there won't be any surprises after installation.
01

Light Color Defines the Look

Use warm white (2700K). The stone itself has an off-white, creamy tone; cool light passing through it makes it look grayish and dingy, whereas warm light brings out that honey-like hue seen in the photos.

02

Clean Only with a Dry Cloth

Alabaster is a natural stone that absorbs water and cleaning agents, which can leave permanent stains. Disconnect the power, let the bulb cool down, and then wipe the fixture with a soft, dry cloth—do not use water or spray cleaners.

03

It is heavier than it looks.

The density of the stone is far greater than that of a glass shade of the same size; ensure the ceiling's load-bearing capacity is sufficient for safety.

Geometric Alabaster Sculptural Floor Lamp - view 10 | Vidirlighting

A new perspective

Light changes everything

Discover sculptural lighting designed to bring warmth, character, and atmosphere to every room.

01 / Natural Materials Vidir Alabaster Cylindrical Chain Chandelier Our product Alabaster Cylindrical Chain Chandelier
Our Natural Alabaster Products

Natural Alabaster Lamps

Alabaster is translucent, so the light travels through the stone rather than escaping at the edges — the whole shade glows, veining and all. Every piece carries a pattern that was decided underground, which is why no two are alike.

Unique veining Soft, natural translucency Will not yellow
02 / Resin Material
Industrially Replicated Surface

Limitations of resin

Resin is cast in moulds, so the "veining" repeats from one shade to the next and the light passes through evenly with no depth to it. It also ages differently: sitting close to a warm bulb, resin tends to amber and grow brittle within a few years.

Prone to yellowing Uniform light transmission Repeating pattern

THE ART OF ALABASTER

Light, hidden within every texture.

The natural texture of alabaster brings a warm, mineral quality to the space. (Please contact us if you require a specific texture.)

Pure
01 / 05

Pure

A pure white texture reminiscent of fresh snow—warm, smooth, and refined.

Ink-Dyed
02 / 05

Ink-Dyed

Deep, inky patterns flow across a white base.

Lightning Pattern
03 / 05

Lightning Pattern

A dynamic pattern resembling a bolt of lightning streaking across the sky.

Ice-Crackle Pattern
04 / 05

Ice-Crackle Pattern

Fine, intricate cracks evoking the aesthetic beauty of a sheet of ice at the moment it shatters.

Snowflake Pattern
05 / 05

Snowflake Pattern

A pattern as light and airy as falling snowflakes, with every single flake unique.

Material · Method · Light

The art of alabaster

Every texture tells a story of natural light and patient craftsmanship.

01

Crafted from select natural alabaster, preserving its unique veining.

02

Meticulously cut and shaped by artisans.

03

Repeatedly ground and polished for a smooth, refined texture.

04

Carefully assembled and quality-inspected.

Custom Stone Lighting

Crafting Unique Stone Textures for You

We create bespoke stone lighting fixtures featuring unique textures tailored to your specifications. From one-off custom pieces to multi-unit project orders, we cater to a wide range of custom requirements for residential, hospitality, and commercial interior design.
Custom Stone From inspiration to the finished product, every detail can be customized.
Custom dimensions
Stone texture selection
Surface finishes
Shapes and profiles
Multi-piece orders
Trade and architectural projects
Stone sample service
Material study / 01Vidirlighting