Features of Alabaster Lighting Fixtures → → →

Nature's Gift

Every lamp is a singular piece of the earth

Alabaster is a natural mineral formed over thousands of years of geological sedimentation. The veining, hue, and translucency of every panel is unrepeatable. The flowing cloud patterns and delicate mineral fissures are nature's fingerprints—each lamp is not merely a lighting fixture, but an irreplicable work of natural art that belongs to no one else but you.

A Light That Breathes

Healing warmth, never harsh

What makes alabaster captivating is its exceptional ability to glow without revealing the source. It filters out the glare of raw light and transforms it into a warm, soft, and atmospheric ambiance. In an instant, the cold edges of a room dissolve—replaced by a quiet, healing presence that turns any space into a sanctuary.

The Touch of Craftsmanship

Hand-polished, never machine-made

Each raw stone is studied repeatedly by skilled artisans. From coarse to fine grit, it passes through multiple stages of hand-polishing until the surface reveals a matte, silken sheen. Every imperfection is intentional. Every curve is the trace of a craftsman's hand—evidence that this lamp was made, not manufactured.

An Heirloom of Time

Built to age, not to fade

Natural alabaster possesses remarkable durability and physical stability. It will not yellow under light, nor emit chemical odors. Its life force endures the test of time—unfazed by years. As decades pass, a subtle patina forms on the surface, deepening its character and making the stone feel even more grounded and refined.

Alabaster lamp showcasing natural stone texture and warm glow

— Crafted from natural alabaster, illuminated by warm light —

Recommended Choice

Why Natural Alabaster, Not Resin

A side-by-side comparison of materials

Dimension	Natural Alabaster	Resin / Faux Stone Glass
Touch	Warm and smooth like jade, with the substantial weight of natural stone	Cold or plasticky, lightweight and hollow-feeling
Light Transmission	Semi-translucent crystalline interior—light reveals layered depth and dimension	Flat, uniform transparency—light passes through without character or life
Durability	A natural mineral that never yellows or fades, even after decades	Ages quickly, may release odors when heated by the light source
Uniqueness	Each piece has its own veining—genuinely one of a kind	Mass-produced from molds—every unit looks identical

Description

The Bryony Tiled Alabaster Floor Lamp builds its drum shade from dozens of small squares of natural alabaster, set edge to edge in a grid. Because every tile is cut from a different part of the stone, they don't light evenly — some come up pale and milky, some carry a warm amber grain, one or two glow noticeably brighter than their neighbours. The shade reads as a field of small individual panels rather than one continuous surface.

That difference is the whole reason for building a shade this way. A single large piece of alabaster gives you one gradient and one set of veins; a hundred small ones give you a hundred, and the eye keeps finding new ones. It also has a practical origin — stone this translucent is rarely found in large flawless sheets, so working in small tiles is how the material has always been used at scale, from window screens to lanterns. Beneath it, the base does the opposite job: a slim black column tapering to a wide flat disc, dark and quiet so that nothing competes with the light above it. Set beside a sofa or an armchair, it throws a soft warm glow at head height and reads as a lit object in its own right when you're across the room.

Natural Alabaster

Naturally Unique Veining

No two pieces of stone are ever the same

Alabaster is a natural stone, so every piece carries its own veining and subtle variation in color. The fixture you receive may therefore differ slightly from the images shown.

An inherent characteristic of real stone — not a quality defect.

Real Photo Inline foot switch and US plug on the black power cord of the Bryony Tiled Alabaster Floor Lamp

Power & switch

Just Step On It

The switch sits on the cord, where your foot already is. No bending down to a socket, no reaching up into a hot shade.

Foot switch On the cord, on and off with one press.

Plug and play Standard US plug. No electrician, nothing to wire.

59″ cord 150 cm — reaches an outlet behind a sofa.

On and off only. To dim it, use a dimmable bulb with a plug-in dimmer.

Specifications

The Details

Material Genuine Natural Alabaster Shade · Metal Base Shade built from individually cut stone tiles set edge to edge.

Finish Natural Stone White Shade · Black Base

Light source E26 socket The standard household screw base in North America. Bulb not included.

Voltage AC 110–240V

Power Plug and play — no hardwiring, no electrician Plugs into any standard wall outlet.

Control Foot switch on the cord Dimmable if you fit a dimmable bulb on a plug-in dimmer.

Cord length 150 cm / 59″ Switched plug included. Can be extended on request — ask before ordering.

Environment Indoor only

Preparation time 5–10 days Made and inspected at our own workshop before dispatch.

Good to Know

You will see the tiles, and they will not match

The shade is built from many small squares of natural stone, each cut from a different piece. So some tiles glow paler, some warmer, and one or two noticeably brighter than their neighbours — and the seams between them stay visible when the lamp is lit, forming a faint grid across the shade. Both are how a tiled stone shade is made. Neither is a fault, and no two lamps repeat the same pattern.

Nothing to install

This is a plug-in lamp with a foot switch on the cord — no junction box, no electrician, no holes in anything. Unpack it, plug it in, and press the switch with your foot. That also means you can move it to another room, or take it with you when you move out.

About dimming

Dimming depends on the bulb you fit. Put in a dimmable E26 bulb and pair it with a plug-in dimmer between the lamp and the outlet, and it dims — the foot switch alone is on and off. An ordinary bulb will not dim whatever you plug it into.

Check where the outlet is first

The cord is 150 cm / 59″ including the switched plug — enough to reach an outlet behind a sofa, but not across a room. Measure before you decide where the lamp goes, and if you need it longer, ask us before ordering and we'll extend it.

Size Guide

Three Heights, One Shade

The stone drum is the same on all three — what changes is how high it stands, and that decides whether you look at the light or into it.

The same shade on every version ∅ 15.7″ ∅ 40 cm tiled alabaster drum Because the shade never changes, the pool of light is the same on all three. You are choosing a height, not a size — and height is what decides how the lamp behaves beside your furniture.

61″ — The Low One

∅ 15.7″ × H 61.0″ ∅ 40 × H 155 cm

Best forBeside a low sofa or a deep armchair · bedroom corner · smaller rooms where a tall lamp would loom

Ceiling8 ft

SitsLowest of the three — the shade reads at seated eye level, so the glow feels close and contained.

The right choice if you sit low and read a lot.

66.9″ — The StandardMost Chosen

∅ 15.7″ × H 66.9″ ∅ 40 × H 170 cm

Best forBeside a standard sofa · reading corner · living room end table · the safe answer in most rooms

Ceiling8–9 ft

SitsThe middle height — clears an armrest comfortably and still keeps the bulb out of sight when you're sitting.

If you're unsure, this is the one.

71″ — The Tall One

∅ 15.7″ × H 71.0″ ∅ 40 × H 180 cm

Best forBehind a sofa · beside a high-backed chair or a bed · corners of tall rooms · lighting a wider area

Ceiling9 ft +

SitsAbove most furniture backs, so the light spreads wider — but check you can't see under the shade from your sofa.

Best where it stands behind or beyond the seating, not next to it.

The design

A Hundred Small Pieces, Because Stone Is Honest

Nobody chose which tile would glow brightest.

Translucent alabaster almost never comes out of the ground in large flawless sheets. So for as long as people have wanted light to pass through stone — in window screens, in lanterns, in altar panels — they have worked it in small pieces and set them side by side. The Bryony shade is built the same way: dozens of squares, each cut separately, each carrying a different part of the same stone.

That constraint is what makes it worth looking at. A single large panel gives you one gradient and one set of veins. A hundred small ones give you a hundred — some coming up pale and milky, some warm amber, one or two noticeably brighter than the tiles beside them. Nobody arranged that. It is simply where each piece happened to sit in the block, and it means no two of these lamps will ever glow the same way.

Everything below the shade is built to get out of the way. The column is black, slim, and tapered, narrowing as it rises so the eye slides past it; the foot is a plain flat disc doing nothing but holding the lamp steady. Dark base, lit stone — the whole design is an argument about where you should be looking. Switched off in the afternoon, the shade still holds its honey tone against a pale wall, which is more than white fabric or clear glass can say.

— Assembled from what the stone gave us, one square at a time —

Questions, Answered

Common Questions

What the shade looks like lit, which height to pick, and how it plugs in.

Why aren't the tiles all the same colour?

Because they are real stone. The shade is made of dozens of small squares of alabaster, and each one is cut from a different piece — so some glow pale, some warm amber, and one or two brighter than the tiles next to them.

You will also see the joins between tiles when the lamp is on, like a faint grid across the shade. That is how a tiled stone shade is built. Neither of these is a fault, and it means no two of these lamps look the same.

Which height should I choose?

Sit down where the lamp will stand and think about your eye level. The bottom of the shade should sit at or just above your eyes when seated — high enough that the light reaches your book, low enough that you never see under the shade into the bulb.

61″ for a low sofa or a deep armchair. 66.9″ beside a standard sofa — the safe answer in most living rooms. 71″ when the lamp stands behind the seating, or next to something tall like a high-backed chair or a bed.

Does it need an electrician?

No. It plugs into an ordinary wall outlet — no wiring, no junction box, no holes in anything. Unpack it, plug it in, done. It also means you can move it to a different corner, a different room, or take it with you if you move house.

How do I turn it on?

There is a foot switch on the cord — press it with your foot, no bending down and no reaching up under the shade. The cord is 150 cm / 59″ including the plug, which reaches an outlet behind a sofa but not across a room, so check where your nearest outlet is before you decide where the lamp goes. Need it longer? Ask us before ordering.

Can I dim it?

Yes, but the foot switch is only on and off. To dim it you need two things: a dimmable bulb, and a plug-in dimmer that sits between the lamp's plug and the wall outlet.

Those cost very little and are sold everywhere. An ordinary bulb will not dim no matter what you plug it into — that is the most common reason people think a lamp is faulty when it isn't.

What bulb does it take?

A standard E26 screw-in bulb — the normal household size in the US and Canada. Bulb not included. Choose warm white, around 2700K: cool white light fights the natural warmth of the stone and makes the shade look grey instead of honey-coloured.

Is it bright enough to read by?

Beside a chair, yes. Stone softens light rather than blocking it, so what you get is a warm pool around the lamp with no glare and no visible bulb — easy to sit next to all evening.

What it will not do is light a whole room on its own. Treat it as the lamp beside the chair, not the ceiling light. If you want more brightness, change the bulb, not the height — all three heights use the same shade, so a taller lamp spreads the same light wider rather than giving you more of it.

Will it tip over?

The base is a wide flat disc, weighted low, which is what keeps a tall narrow lamp steady. That said, stone up top is heavier than fabric, so use common sense in a house with toddlers or a large dog — set it against a wall or beside furniture rather than out in an open walkway.

How do I clean it?

A soft dry cloth on the stone, and the same on the black base. Keep water off the shade — alabaster is porous and absorbs it, leaving a mark that will not come out.

No sprays, no polish, no scouring pads. Switch it off and let the bulb cool first. Dust is easiest to catch with a dry microfibre cloth before it settles into the seams.

Can I use it outside, or in a bathroom?

No — this is an indoor lamp for dry rooms only. Alabaster is porous, so damp is bad for the stone as well as the wiring. A living room, bedroom, study or hallway is where it belongs.

New

Bryony Tiled Alabaster Mosaic Floor Lamp

SKU: V-FLAL2608102-1

$2,995.00

Unit price: per

The price includes tax, and free standard shipping within the U.S. is provided.

Size: Ø 15.7" × H 61"

Colour: White + Black

Plug options: US plug

Availability

Quantity

Tax & Shipping calculated at checkout.

✦ With a brand-new lighting ambiance, let's usher in a hopeful 2026 10% Off All Lighting ✦

Free Shipping on all orders

Hassle-free return within 30 days

Payment Security

FAQ

✦ Complete the Look

Pairs Well With